Bambu Support for ABS

Support for ABS

· Easy Support Removal · Superior Support Interface Quality · Works with AMS

Easy Support Removal

Specially formulated for ABS, our support material adheres precisely to the ABS surface, allowing for easy support removal. This streamlines your post-processing work, ensuring a more efficient workflow.

Superior Support Interface Quality

Support for ABS enables a 0 Top Z distance and 0 Top interface spacing when printing, ensuring a scar free support surface. This enhances the sharpness of details, improving the overall appearance and integrity of your final prints.

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through Bambu Lab's AMS (Automatic Material System).

Download

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

1.Accessory Compatibility

Not compatible with Cool Plate SuperTack, and Hotend with Stainless Steel Nozzle 0.2 mm.

2.Drying Recommendations

Dry before use to ensure the best print quality and consistent finish. Store in a dry environment after use. For more details, please refer to: Filament drying instructions on WIKI.

3.Limonene Dissolution Guidelines

Support for ABS is soluble in limonene. Please pay attention to the usage norms and safety.

4.Ventilation & Odor Notice

Pungent and unpleasant odors may be released during printing. Make sure your printer is enclosed and placed in a well-ventilated area.

5.Usage Tips

• When layer strength is required, it is recommended to increase the flushing volume to above 800 mm³. If the flushing is not thorough, it may reduce the layer adhesion of the model at surfaces that are on the same horizontal plane as the support surface.
• By increasing the "initial layer speed", a more peelable support can be obtained. However, this will increase the risk of warping.
• For more support-related settings, please refer to Support on WIKI.

6.Safety Tips

• Please store the filament in a cool, dark, and dry environment away from direct sunlight and high temperatures.
• Please keep filament and any broken fragments out of reach of infants, children, and pets to prevent swallowing or choking.
• For opened filament, we recommend drying before use according to the wiki’s recommended temperature and time settings.
• Please print this filament in a well-ventilated area, or install an effective air filtration or exhaust system.
• As this filament is not food-grade, please avoid using finished prints for food storage or contact.
• We recommend using an enclosed printer. At printing temperatures, this filament may release harmful gases, including styrene, which can cause dizziness or nausea. For extended operation, please wear a protective mask with a vapor filter (such as an activated carbon mask). If individuals with asthma or respiratory conditions, pregnant women, or children are present, please increase ventilation or pause printing with this material.